This is for all of our friends out there who 1) use Google Drive/Google Docs and 2) don’t know much more about it than how to open a new document, write on it, and close it out. I use Google Drive for everything creative and that which wishes it was. It’s not perfect — they need to work a bit harder on that spell check feature — but it is very good at many other things, such as locating that document that you created three years and two computers ago and immediately forgot about but that you need right now. Oh. And updating. Google Drive is really good at automatically updating your document as you move right along. That brings us to today’s helpful hint.
I recently spent several days using Google Drive while working on a legal analysis. I was putting the finishing touches on my document, which I had creatively named “Analysis for (insert client’s name here)” when I received a long anticipated email with information which I needed for the very project on which I was working. The email also needed an immediate response from me. Since my response was a bit involved I opened a new Google document, drafted the response, and copied and pasted it to my responding email. I returned to my blog draft in “Analysis for (insert client’s name here)” opened it, and accidentally made a click here and a click there. The several pages or so of analysis which I had painstakingly written during the previous week or so were replaced in the “Analysis for (insert client’s name here)” document by the email response which I had just written. Gone. Vanished. I clicked on the “Edit” menu and the clicked “Undo” and nothing happened. I thought that my work had possibly been moved a few pages down by my accidentally pasting my email into the document. No. That’s not what happened. I still don’t know what happened. All of my work on that analysis was gone, however. Or so I thought.
I at that point yelled “Oh shoot” (or something like that) which did very little good, other than for scaring the cat away which is never a bad thing It just wasn’t helpful. I got up, got a cup of coffee, and went through the motions of deciding whether to try to begin the analysis all over or to binge watch True Detective: Season One for the twenty-secondth time. I took a sip of coffee and thought about things, like dead pets and old girlfriends, and my brain sideloaded an idea. I went back to my computer, googled a question, and immediately received the answer I wanted, which I will now share with you.
The question which I inartfully asked was: “Can I access revisions of a document drafted in Google Drive?” The answer was a resounding “Yes!” It is easy to do. Just open the file that you have messed up and click on the pull down “File” menu. You will find an option for “See revision history”at a point about halfway down the menu A list with the heading “Revision history” will pop up on the right side of your screen. Just go on down the list to find the revision you want. I did that. I couldn’t find the version of my document that I was looking for. I went all the way to the bottom of the list and found a link with the title “Show more detailed revisions.” Just run through the list until you find the revised version of the document that you want.
This is a terrific feature, particularly if you’re working on a document that is getting passed back and forth among folks. It enables you to access who made what changes, and when. It settles arguments regarding which attorney used the sloppy language in the divorce agreement, or who forgot about The Lord Mansfield Rule when making provisions in the will for that red-headed stepchild. I have also heard that teachers are having great fun with this feature. Many if not most schools are utilizing online homework submission (among other things) thanks to Google, which is providing students with their own school email and Google Drive accounts which they can utilize to complete tasks and email to their teachers. The student accounts are in the school mainframe and can be accessed by the teacher. Mrs. Krabappel can accordingly check to see if Bart Simpson has been working on his class paper all week or simply dashed off a few sentences the morning it was due.
There is a lot more that you can with this feature. you can find a good overview of it with an understandable explanation here. Play with it if you like (try opening a new document and typing just a few sentences, just in case it’s not working when you try it, heh heh). Meanwhile…does anyone have any cautionary tales which they would like to share about accidentally erasing a creative endeavor, including what they did about it after the fact?










e mutually exclusive. Both are handguns, but they operate under entirely different principles. A revolver, otherwise known as a “wheel gun”, holds its cartridges in a cylinder that rotates as the hammer comes back and prepares for each shot. The revolver in the picture features an external hammer, and can be fired double action (DA) or single action (SA), which makes it a DA/SA revolver. (Double action means that with the hammer down, a single pull of the trigger with bring the hammer back, rotate the cylinder, and then drop the hammer again, firing the gun. Single action would describe the condition where the hammer is manually cocked and remains back–“condition zero”. From this condition, the trigger is more sensitive by a large margin.) Generally, there are no external safeties on a revolver. The fact of the long DA trigger pull functions as a safety. Only a fool would carry a revolver in condition zero.
A pistol, on the other hand, carries its load in a magazine that is inserted in the grip. As the weapon fires, the slide cycles, ejecting the spent shell casing and pushing the next round into battery. The picture at the top of this post of me at the range shows this cycling action of a Glock 36 at 1/4000 of a second–thanks to my son, Chris, for getting the picture.
The pistol in the picture with the revolver has no hammer, but is rather “striker fired”–a distinction that is best left to a future post. Striker fired pistols may or may not have external safeties. Some pistols have external hammers, such as the Colt Defender in the picture. As shown, the Colt is in condition one, which means cartridge in the chamber, hammer back and safety on–otherwise known as “cocked and locked.” In yet another iteration, many manufacturers make DA/SA pistols. The Bersa Thunder in the photo offers a very long, hard DA trigger pull for the first shot, which leaves the hammer back for a SA follow-up shot. For most DA/SA pistols, the “safety” is not a safety at all, but rather a de-cocker, which safely returns the hammer to its DA position.
If your character is an on-duty cop or active duty military, where sidearms are worn in some kind of duty rig, the sky’s the limit for what they want to carry. You can buy holsters for all kinds of hand cannons. The choices become more limited when it’s important for your character to conceal his or her weapon. As a general rule, the larger the firearm, the harder it is to conceal. The obvious corollary is that bigger people can conceal bigger guns.
When it comes to carrying a gun on one’s belt, the critical first choice is inside-the-waistband (IWB) vs. outside-the-waistband (OWB), and both mean exactly what the words say. Generally, OWB carry is more detectable,
but with the right holster and an effective cover garment, it can be very effective. By contrast, IWB carry allows for concealment by means as simple as an untucked T-shirt. On the downside, the gun takes up waistband real estate that would otherwise be used by the waist.
If your character wears skinny jeans, IWB could be a problem. IWB carry positions are referred to as positions on a clock face, where one’s navel would be 12 o’clock and the right hip would be 3 o’clock. The IWB position in the picture is referred to as “appendix carry”, and for the life of me, I don’t know how he would be able to sit down. Shoulder rigs are popular in movies and television shows, but I
have never met a real person who wore one and didn’t hate it over time. They’re hard on the shoulders, and you can never let your arms hang normally. But the deal breaker for me would be that during the draw stroke, you pretty much have to point the gun at the person behind you, and then subsequently at yourself. That violates the basic tenets of firearm safety–as do many of the specialty retention devices such as the bra holster. ‘Nuff said, can we agree?
the only concealment option is a vest pocket, or perhaps a boot? Search the Web for specialty guns that are actually well-made and very effective for what they are. North American Arms makes a mini-revolver that easily fits in your fist, and can be chambered in .22 magnum, a round that shows very similar terminal ballistics to a .38 special, un
der ideal circumstances. The tiny, nearly non-existent barrel is a problem for a shot longer than, say, 10 yards, but as a belly gun, it’s kind of impressive, and since it’s a revolver, your character gets five tries to bring justice to another character.